覆盖一个nd Tool Steels

覆盖一个nd Tool Steels

Selectrode’s full range of wear repair alloys covers the full spectrum of alloy types from Cobalt based electrodes through and including fine diameter flux and metal cored semi automatic spooled wires.

The Cobalt based electrodes are unique to the market due to their ability to weld easily not only on direct current welders but also large and small alternating current machines. The arc transfer is a spray type which creates weld metal flow that is exceptional. The slag is totally self releasing yielding weld deposits that are extremely fine rippled and uniform. Our wide range of cobalt alloy types includes grade numbers: 1, 6, 12, 21 and 25 in both flux coated electrodes and bare torch/Tig alloys.

Similarly our range of tungsten carbide overlay products is also extensive. We manufacture tubular carbide filled electrodes and torch rods with tungsten carbide fill contents ranging from 37% up to and including 60%. Tool steels are a major component of our wear facing group with all of the hardening types covered in both stick electrode and Tig versions. Chromium carbide electrodes of all types head up the group of common repair alloys. This selection which also includes manganese and nickel manganese electrode grades that are used for wear applications ranging from sliding abrasive wear resistance through work hardening applications.

A very special and proprietary range of overlay electrodes is our large diameter low operating amperage tubular electrodes that offer numerous operational benefits. These electrodes manufactured in diameters up to and including ½” (13mm) can be deposited at unusually low amperages. The low amperage factor totally minimizes warpage and distortion on the parts being repaired. Deposition rates are dramatically higher than conventional solid core wire electrodes and closely approach the rates witnessed with semi automatic tubular wires. Rounding out the Selectrode wearfacing line is the fine diameter cored wire range of Mig wires. This group includes lower hardness buildup chemistries and also manganese bearing work hardening types. The higher hardness level is headed up by our very popular chromium carbide version. These spooled Mig wires are all manufactured in fine diameters that are usable in automatic feeding apparatus for high speed overlays at very low amperages.

In addition to the standard products, we also offer unique and special products, including:

    Overlay Products

  • All hardness levels of electrodes
  • Carbide and Wear Resistant Torch Alloys
  • .045″ (1.2 mm) and 1/16 (1.6 m) diameter flux cored MIG wires

Choose a Product Number from the list below to view Datasheets or SDS for that product.

Product AWS/ASME DIN Datasheet SDS File
1201 - Cobalt Grade 1 Electrode A 5.13 E CoCr-C 8555: E20-UM-55-CTZ 1201 SDS
1206 - Cobalt Grade 6 Electrode A 5.13 E CoCr-A 8555: E20-UM-45-CRTZ 1206 SDS
1212 - Cobalt Grade 12 Electrode A 5.13 E CoCr-B 8555: E20-UM-50-CTZ 1212 SDS
1221 - Cobalt Grade 21 Electrode A 5.13 E CoCr-E 8555: E20-UM-350-CKTZ 1221 SDS
1225 - Cobalt Grade 25 Electrode _ 8555: E20-UM-250-CKTZ 1225 SDS
1230 - Tubular 60% Tungsten Carbide Electrode _ 8555: E21-UM-65-G 1230 SDS
1231 - 60% Tungsten Carbide Tubular Torch Alloy _ _ 1231 SDS
1235 - 37% Tungsten Carbide Tubular Electrode _ _ 1235 SDS
1247 - High Manganese Stainless A 5.4 E 307-16 8556: E 18.8 Mn R 26 1247 SDS
1248 - Flame Cuttable Manganese Electrode A 5.13 E FeMnC 8555: E7-UM-250-KP 1248 SDS
1249 - Nickel Chrome Manganese High Recovery A 5.4 E 307-26 8556: E 18.8 Mn MPR 33 160 1249 SDS
1250 - Nickel Chrome Manganese Overlay _ _ 1250 SDS
1251 - Chromium Carbide _ 8555: E10-UM-60-GRZ 1251 SDS
1253 - H13热工具钢工作电极 _ _ 1253 SDS
1255 - M2 High Speed Tool Steel A 5.13 E Fe6 8555: E4-UM-60-ST 1255 SDS
1256 - Air Hardening Tool Steel Electrode _ 8555: E6-UM-60 1256 SDS
1257 - All Position Chrome Carbide A 5.13 E FeCr-A1 8555: E10-UM-60-GR 1257 SDS
1258 - Tubular Large Diameter Chrome Carbide _ _ 1258 SDS
1260 - Economical Hardfacing _ 8555: E6-UM-60-GP 1260 SDS
1261 -可加工的累积地毯衬 _ _ 1261 SDS
1262 - Build-up for Extreme Compressive Stress _ 8555: E1-UM-250 1262 SDS
1263 - Metal to Metal Wear Resistance _ 8555: E6-UM-60 1263 SDS
1265 - Smooth Overlay RC 66 to 68 _ 8555: E10-UM-65-G 1265 SDS
1266 - Hot Work Tool Steel _ 8555: E3-UM-45-T 1266 SDS
1267 - RC-67 Niobium Carbide _ 8555: E10-UM-65-GR 1267 SDS
1268 - All Position Shock and Abrasion Resistance _ 8555: E6-UM-60 1268 SDS
1675 - Chromium Carbide _ 8555: E10-55r 1675 SDS
6111 - Air Hardening Tool Steel TiG H-13 (A8) _ _ 6111 SDS
7248 - Impact Resistant Flux Cored Manganese Mig Wire _ _ 7248 SDS
7251 - Chrome Carbide Metal Cored Mig Wire _ _ 7251 SDS
7260 - Metal Cored Hardfacing Tubular Mig Wire _ _ 7260 SDS
7261 - Build-up/Cushion Flux Cored Mig Wire _ _ 7261 SDS

SaveSave